PROVASET T3LPF REV.20210610
70
Access code for modifying or copying products and test programs; not used if null
and void.
Access code for the selection of the active product for testing; not used if null and
void.
the devices are delivered with Administrator Password=1234 and with
programs.
6.14 Unit: barcode reader (option)
A single barcode reader can be used several times before a test to read and store
various information; for example: operator code, batch code, product code, serial
number.
barcode itself.
from a single string.
NO: the product is not selected by barcode;
: the product is selected from barcode 1;
: the product is selected from barcode 2;
: the product is selected from barcode 3;
: the product is selected from barcode 4.
: association of Barcode with test program through jT3 Manager soft-
ware
if the code read does not correspond to a valid code for selecting a product, at
the Start command the operator is warned that the last product already used will be
used and that the Start command must be repeated.
if the code read does not correspond to a valid code for the selection of a prod-
uct, the operator is warned that it is not possible to perform testing.
Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com
To Next Page
Loading...
