PROVASET T3LPF REV.20210610
71
NO: at the end of the test, the codes read are kept in memory and remain valid for
the next test.
: at the end of the test the codes with setting REQUEST=YES are reset.
not used;
the start of the test starts after reading barcode 1;
the start of the test starts after reading barcode 2;
the start of the test starts after reading barcode 3;
the start of the test starts after reading barcode 4;
the start of thetest starts after reading each barcode.
NO: not used;
: reading accepted before each test.
Programmable name, 16 characters max, assigned to barcode 1; examples: operator,
batch, product, series number.
Initial characters of barcode 1, to recognize the function attributed to the code; max-
imum two initial characters.
Only active if single scan is selected.
Specify the start position of the code. If the position is entered with a negative sign,
it is counted from the end.
If multiple scan is selected, it indicates the maximum length of the code.
NO: reading accepted but not necessary;
: reading necessary before each test.
NO: the reading does not reset the other codes already read.
: the reading requires the rereading of all the other codes;
Example: reading the batch code forces the rereading of the product code.
As above, for barcode 1.
As above, for barcode 1.
Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com
To Next Page
Loading...
