PROVASET T3LPF REV.20210610
72
As above, for barcode 1.
Example for barcode 1:
Parameters:
Enabled= YES; Name= VALVE ; Start with=V ; Requested=YES; Reset=NO; Set product
with= barcode 1; Requested product= YES.
Barcode reading:
VN123-ABC
When the code is read, the menu window shows: VALVE N123-ABC.
If a product programmed with the parameter name = N123-ABC exists, a new test is
started with the product called by the code.
6.15 Barcode associations database group (option)
NO: not used;
: reading the barcode enables the test cycle with the product or program related
to the code itself present in the database on the T3L.
enabling the association database function excludes the use of a certain
product or program associated with the relative barcode set in the product
code menu or program code for test cycles with the use of a barcode reader.
Tests are performed with the product or program associated with the relative
barcode code set in the database.
of the T3L.
key.
The
codes) imported into the T3L database.
If in the menu 'the key is selected and then
with the barcode reader a code is read that is not present in the T3L database, it is
possible to add the code in the database itself, pressing the key on the message
, then it is necessary to associate the code read
to a PRODUCT or a TEST PROGRAM by pressing the dedicated key in the menu that
appears on the T3L display.
In the next step it is necessary to select the desired PRODUCT or TEST PROGRAM
from the list that is displayed and press the
In this way, the T3L database now contains the new code associated with a product
number or a program number and in the box the number of
associations (e.g. codes) present in the T3L database is updated.
Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com
To Next Page
Loading...
