PROVASET T3LPF REV.20210610
84
10. PRINTER
If the printer option is installed, the PROVASET T3L instrument can print one or
Press the key
to print the labels.
Example, to print with serial line 1:
communication with printer;
it is possible to select a printer model on the menu page
that contains all the types of printer that Tecna provides.
communication on RS232 interface;
8-bit communication, no parity, 1 stop bit.
A print command can be issued by:
• key
on the T3L display (only one copy);
•
(only one copy);
• automatic printing at the end of the test, programmed in the test program.
Labels are printed according to the parameters programmed in the test program.
See Printing parameters page 57
STM print mask: label printing format selection number;
STS automatic printing mode: printing only with a PASSED result or always with
every test, even with a FAILED result;
STN number of printed copies to be printed automatically at the end of testing;
At the end of each test, automatic printing is enabled if STN
With the parameter STS=0, the labels are printed only for tests with a PASSED result;
otherwise the labels are printed for every test, even with a FAILED result.
Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com
To Next Page
Loading...
