TECNA PROVASET T3LPF - Page 85

PROVASET T3LPF REV.20210610
85

-
ator, and sent to the printer, using a service program on a Personal Computer, that is
provided on request.

number, which can be set in the STM parameter of the test program.
The message sent to the printer at the end of the test begins with the print mask
-
formation on the last test performed; the print mask (template) contains information
to extract from the message only the variables to be printed, with the position on the
label and its formatting.
-
uct by simply programming the STM parameter in the test program.

The application program "T3 label layout ", for the Windows operating system, is
available with the option to print for a standard printer.
The layout program can be used both to design the print masks, positioning the vari-
ables and indicating their formatting, and to send the print masks to the printer.
Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com