EasyManua.ls Logo

Tecno T473 - Quick Start Guide; Install SIM Card; Install T-flash Card; Install Battery

Tecno T473
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
1. Quick start
Install SIM card
This phone supports two GSM SIM cards. Find SIM card’s
groove in the back of the phone and slide it completely
there. During installation, please make sure insert the SIM
card into slot completely and pay attention to slot
direction.
Installing T-flash card
1. First switch off the phone and remove the battery.
2. Place the memory card into the SD card slot with the
metal contacts facing down.
Installing Battery
Align the battery chip with the metallic salient point in
battery jar; insert the battery until it is inserted into the
battery jar. Install the back cover into the back of the
phone until it is locked.
Battery Charging
Check the model number of any charger before use with
the device. Connect the charger to a wall outlet, and
connect the plug from the charger into the USB port on the
bottom of your phone. If we charge it with electricity, the
phone’s battery icon will move. After charging is finished,
just pull out the plug.
Switching on/off
Long press the power on/off key to switch on or off.

Related product manuals