To Next PageTo Next Page
Need help?Do you have a question about the Tecnodom Attila 10 TRAYS and is the answer not in the manual?
Specifies the ambient operating temperature range and maximum weight capacity for the unit.
Details critical safety measures for electrical connections, maintenance, and unit operation.
Defines user qualifications, supervision requirements, and general handling advice.
Provides instructions on how to properly use and maintain the user manual.
Outlines the manufacturer's right to modify products and compliance with food contact regulations.
Presents detailed technical specifications in tabular format for different unit configurations.
Highlights that certain technical operations must be performed by qualified personnel only.
Details procedures for safely transporting, unloading, and packing the blast chiller.
Explains the connection and function of the condensate water drainage system.
Covers optimal unit placement, leveling, and required minimum distances from walls.
Provides guidelines for installing the unit indoors, including environmental considerations.
Compares the characteristics and installation considerations for units with integrated versus separate condensing units.
Covers the requirements and procedures for connecting the unit to the electrical power supply and ensuring proper earthing.
Lists essential checks and preparatory steps required before starting the blast chiller for the first time.
Guides the user through powering on the unit, initial chilling, and referencing temperature settings.
Details the daily and monthly cleaning routines for the blast chiller's internal chamber and temperature probe.
Provides instructions for cleaning the condenser unit to ensure optimal performance and longevity.
Specifies maintenance tasks and precautions related to the blast chiller's condenser unit.
Defines user requirements, supervision needs, and safety practices during operation.
Step-by-step instructions for performing manual defrosting on the blast chiller.
Specifies the weight limits and storage considerations for items placed on the unit's shelves.
Explains how to choose between time-based cycles and core probe-controlled cycles.
Details the use of the core probe for accurate temperature readings of food items.
Instructs on correct food placement, thickness limits, and spacing between pans for optimal chilling.
Lists recommended storage durations and temperature conditions for various food types.
Provides recommendations for protecting chilled food, including packaging and labeling.
Details the procedure for initiating a blast chilling cycle using the core probe.
Explains how to initiate a blast chilling cycle based on a pre-set time duration.
Summarizes the recommended shelf life for various foods when blast-chilled or deep-frozen.
Lists specific process parameters like pan size, thickness, and freezing time for different food items.
Describes the functions managed by the control panel, such as chilling modes and conservation.
Details the display, keys, and stand-by status of the control panel.
Guides the user on setting blast chilling cycles using either time or the core probe.
Explains how to initiate, stop, and manage blast chilling cycles via the control panel.
Describes common error codes related to temperature probes and their meanings.
Explains the compressor's operating conditions and its protection mechanisms.
Lists and describes all settable parameters for the blast chiller's operation.
Specifies routine inspections required to ensure the system's proper functioning.
Provides guidance on replacing parts like fan motors and compressors, and disposing of materials.
Details the information required when ordering replacement parts for the unit.
Lists common error messages and their corresponding troubleshooting steps.
Contains information regarding the product's adherence to EU directives and standards.
Specifies how to store and reference the Declaration of Conformity document.
Illustrates the product identification plate and explains the meaning of each labeled field.
Details the meaning of each field and code found on the product identification label.
Outlines the safety standards and climatic class requirements applicable to the unit.
Provides detailed measurements for the blast chiller model with 3 trays.
Provides detailed measurements for the blast chiller models with 7 and 10 trays.
Provides detailed measurements for the blast chiller models with 15 and 20 trays.
Presents the outcomes of the dielectric strength testing conducted on the equipment.
Specifies the type of refrigerant gas, its load, and Global Warming Potential (GWP).
Shows the electrical connections and layout for the 5/10 tray blast chiller model.
Explains the symbols and codes used in the electrical diagrams.
Illustrates the electrical connections for the 5/10 tray blast chiller with touch control.
Shows the electrical connections and layout for the 15/20 tray blast chiller models.
Illustrates the electrical connections for the 15/20 tray blast chiller with touch control.
Lists the official contact information for Tecnodom S.p.A., including address, phone, and email.
States that product images and specifications are indicative and subject to change.
General