TECNOEKA Srl ______________________________________________________________ use and instruction manual
page 10 __________________________________________________________________________________________
Replacing oven lamp - Electrically switch off the appliance; unscrew the protective glass cap
(Fig. 6); unscrew the lamp and replace it with another lamp suitable for high temperatures
(300°C), with the following characteristics:
- Voltage 230/240 V
- Power 35 W
- Fitting E 14
Refit the glass cap and power up the appliance.
Put back the lamp cover with the gaskets and turn on the electricity.
11. Technical assistance
Before leaving the factory, the appliance was completely regulated and tested by expert
specialised personnel to guarantee the best operating results.
All repairs and settings must be performed with utmost care and attention, respecting national
safety regulations in force. Always contact your retailer or our nearest Service Centre, giving
details of the problem, the appliance model and the serial number (on the rating plate on the
rear panel).
For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the
cover or going to www.tecnoeka.com.
12. Informations to the consumers
Further to Directive 2012/19/UE, the symbol of the crossed rubbish skip on
the appliance means that at the end of its life, the product must be
disposed of separately from the other rubbish. The user must hand the
appliance to a specialised waste collection centre for electric and electronic
equipment.
The separate collection of the rubbish and subsequent treatment, recovery and disposal help to
produce other equipment using recycled materials, reducing the negative effects on the
environment and public health, which would be caused by incorrect management of the
rubbish.
Should the user dispose of the product abusively, administrative sanctions would be applied.
To Next Page
Loading...
