__ TECNOEKA Srl ____________________________________________________ operating and instruction manual _
_ page 32 _________________________________________________________________________________________
From the SUMMARY SCREEN
From the SUMMARY SCREENFrom the SUMMARY SCREEN
From the SUMMARY SCREEN
Use the "STEP"
"STEP" "STEP"
"STEP" key to select the "CAVITY TEMPERATURE" parameter .
Touch the "SELECT"
"SELECT""SELECT"
"SELECT"
key: this calls up the screen with the 3 different temperature
parameters.
Use the "STEP"
"STEP""STEP"
"STEP"
key to select the "CORE TEMPERATURE" parameter
and use the
and
keys to set the desired value.
Use the "STEP"
"STEP""STEP"
"STEP" key again to confirm the setting and select the "DELTA T" parameter .
Use the
and
keys to set the desired value.
The value is confirmed automatically after 5".
IMPORTANT
The "DELTA T" parameter allows you to keep the difference in temperature (
) between
the inside of the food (temperature measured by the needle temperature probe) and inside of
the cooking cavity constant throughout the cooking step. This means that the value of the
temperature inside the cooking cavity becomes the sum of the value of the temperature inside
the food and a fixed temperature value "
" set by the operator.
In practical terms, you get a slow increase in the cooking cavity temperature, with a constant
difference from the temperature inside the food, which – as a result – undergoes a long and
gentle cooking process (when cooking meat, this means that the proteins are retained as it
avoids the surface tension that is otherwise associated with the crust forming too quickly).
From the "HUMIDITY/STEAM %"
From the "HUMIDITY/STEAM %" From the "HUMIDITY/STEAM %"
From the "HUMIDITY/STEAM %" PARAMETER SCREEN
PARAMETER SCREEN PARAMETER SCREEN
PARAMETER SCREEN
(
optional function)
Once you have set the "DELTA T" parameter value , touch the "SELECT"
"SELECT""SELECT"
"SELECT"
key: the
"HUMIDITY/STEAM %" parameter screen appears. Use the
and
keys to set the desired
value. Touch the "SELECT"
"SELECT""SELECT"
"SELECT"
key to confirm the setting.
To Next Page
