TECNOEKA EKF 664 TC - Program and Recipe Management; Storing, Deleting, and Copying Recipes

_ Electronic convection oven _ rev. 0 ________________________MODD. EKF 664 TC – EKF 711 TC – EKF 1064 TC
EKF 1111 TC – EKF 1664 TC – EKF 2011 TC
_________________________________________________________________________________________ page 33 _
From the SUMMARY SCREEN
From the SUMMARY SCREENFrom the SUMMARY SCREEN
From the SUMMARY SCREEN
Use the "STEP"
"STEP""STEP"
"STEP" key to select the HUMIDITY/STEAM % parameter and use the and
keys to set the desired value. The value is confirmed automatically after 5". Use the
"START/STOP"
"START/STOP" "START/STOP"
"START/STOP" key to start the cooking cycle.
4.3.7 Program
4.3.7 Program4.3.7 Program
4.3.7 Program mode
mode mode
mode
4.3.7.1 Storing programs (recipes)
4.3.7.1 Storing programs (recipes)4.3.7.1 Storing programs (recipes)
4.3.7.1 Storing programs (recipes)
You can store up to 200 programs/recipes, giving each a NAME
NAMENAME
NAME, which can contain up to 10
letters of the alphabet.
Once you have set the cooking parameters for the program (recipe) you want to store, proceed
as follows:
touch the key to call up the "PROGRAMMING MENU" screen.
Touch the "ST
"ST"ST
"STEP"
EP"EP"
EP" key and select the symbol. Confirm your selection with the "SELECT"
"SELECT""SELECT"
"SELECT"
key: a screen comes up with the letters of the alphabet.
You can use the and keys to move horizontally ( to the left/ to the right) and the
"STEP"
"STEP""STEP"
"STEP" key to move vertically (each "touch" moves one space down, while holding your
finger on the "STEP"
"STEP""STEP"
"STEP" key moves you up).
Once you are on the letter you want (highlighted against a dark square), touch the "SELECT"
"SELECT" "SELECT"
"SELECT"
key, which will cause the chosen letter to appear at the top of the screen.
If you get a letter of the alphabet wrong while writing the name, move over (symbol
against dark square); touching the "SELECT"
"SELECT""SELECT"
"SELECT" key will then delete the letter.
Once you have written the name of the program (recipe), touch the "STEP"
"STEP""STEP"
"STEP"
key to move
over "SAVE" (word highlighted against dark square).