Tecnolec FT8WH - Appliance Error Codes; Product Information and Energy Data

21
Error codes
Display
Possible Cause
Solution
Door is not closed properly. Close the door properly and restart.
Water injecting problem
during wash cycle.
Check if the water pressure is high enough.
Straighten the water pipe.
Clean the inlet valve filter.
Overtime water draining Check the drain hose for blockage.
Water overflow Restart the appliance.
Others
Restart the appliance. If problem persists, please
contact the customer service.
Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2014 with regard to energy labelling of
household washing machines and household washer-dryers
Supplier’s name or trade mark: Etablissements Darty & fils © | Tecnolec
Supplier’s address: 9 Rue des Bateaux-Lavoirs, 94200 Ivry-sur-Seine, France
Model identifier: FT8WH
General product parameters:
Parameter
Value
Parameter
Value
Rated capacity
(a)
(kg) 8,0 Dimensions in cm
Height
85
Width
60
Depth
54
Energy Efficiency Index
(a)
(EEIw)
51,9
Energy efficiency class
(a)
A
Washing efficiency index
(a)
1,031
Rinsing effectiveness (g/kg)
(a)
5,0
Energy consumption in
kWh per cycle, based on
the eco 40-60 programme
at a combination of full
and partial loads. Actual
energy consumption will
depend on how the
appliance is used.
0,472
Water consumption in litre per
cycle, based on the eco 40-60
programme at a combination
of full and partial loads.
Actual water consumption will
depend on how the appliance
is used and on the hardness of
the water.
48
Maximum temperature
inside the treated textile
(a)
(°C)
Rated
capacity
33
Weighted remaining moisture
content
(a)
(%)
53,9
Half
28
Quarter
24
Spin speed
(a)
(rpm)
Rated
capacity
1350
Spin-drying efficiency class
(a)
B
Half
1350
Quarter
1350
Programme duration
(a)
(h:min)
Rated
capacity
3:38
Type free-standing
Half
2:48
Quarter
2:48