What causes water injecting problem during wash cycle in Tecnolec Washer?
If your Tecnolec Washer is having water injecting problems during the wash cycle, check if the water pressure is high enough. Straighten the water pipe and clean the inlet valve filter.
Why the indicator or display of my Tecnolec FT8WH does not work?
If the indicator or display on your Tecnolec Washer isn't working, switch off the power and check if the mains plug is connected properly. The PC board or harness may have connection problems.
Lists included accessories such as cover caps, water supply hose, and acoustic sponge.
Instructions for removing cardboard, styrofoam, tape, and hoses from the washing machine.
Guide to removing transit bolts to prevent damage during operation.
Guidance on placing the appliance on a flat floor with adequate clearance.
Criteria for selecting a suitable installation site, considering surface, sunlight, and ventilation.
Steps to ensure the washing machine is stable and level using adjustable feet.
Details on connecting the washing machine to a 220-240V, 50Hz power supply.
Instructions for connecting the water supply and drain hoses correctly.
Steps to calibrate the washing machine for optimal performance and efficiency.
Step-by-step guide for loading, adding detergent, and starting a wash cycle.
How to choose a wash program using the programme selector dial.
Instructions for setting the desired wash temperature and spin speed.
Details on using additional functions like Prewash and Extra Rinse.
How to set the machine to start a cycle at a later time.
Instructions on how to start the washing cycle, including delay start activation.
Steps to follow if a wrong programme is selected by mistake.
Explanation of the door lock indicator light for safety during operation.
How to activate and deactivate the child lock feature to prevent tampering.
Instructions for cancelling or activating the buzzer sound.
Procedure for cleaning the washing machine's drum using a dedicated cycle.
Explanation of the function that resumes the last cycle after a power cut.
Wiping the exterior of the machine with a soft, damp cloth.
Removing rust stains and descaling the drum using specific cleaning agents.
Wiping the door seal and glass after each wash to remove lint and stains.
Procedure for cleaning the water inlet filter to ensure proper water supply.
Instructions for removing and cleaning the detergent dispenser drawer.
How to clean the drain pump filter to ensure smooth operation, with a warning about hot water.
Table listing error codes, possible causes, and solutions for appliance issues.
Details on how to contact customer service for repairs and spare parts.
Guidelines for responsible disposal of the appliance and its packaging according to local regulations.
To Next Page
General