TECO-Westinghouse E510 Start-Up And Installation Manual

START-UP AND INSTALLATION MANUAL
DOCUMENT - TECO-E510IM
Ver 01: 2015.08
230V Class 1~
IP66/NEMA 4X
0.4 - 2.2 kW / 0.5 - 3 HP
230V Class 3~
IP66/NEMA 4X
0.4 - 15 kW / 0.75 - 20 HP
460V 460V Class 3~
IP66/NEMA 4X
0.45- 18.5 kW / 1 - 25 HP
Read all operating instructions before installing,
connecting (wiring), operating, servicing, or inspecting
the inverter.
Ensure that this manual is made available to the end user of
the inverter.
Store this manual in a safe, convenient location.
T
The manual is subject to change without prior notice.
Refer to the E510 Instruction Manual (www.tecowestinghouse.com).
E510
INVERTER

TECO-Westinghouse E510 Specifications

General

Series	E510
Input Frequency	50/60 Hz
Output Frequency	0-400 Hz
Cooling Method	Forced air cooling
Output Voltage	3-Phase 0-Input Voltage
Power Rating	0.75 to 630 kW (depending on model)
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in or external
Control Method	V/F control, Sensorless Vector Control
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit
Communication	Modbus RTU
Operating Temperature	-10°C to +50°C
Humidity	Less than 95% RH (non-condensing)
Altitude	Below 1000m without derating