Teco Installation and Maintenance Manual
TEFC Squirrel Cage Induction Motors
Teco Electric and Machinery Company
Manual Number: IOM ~ TEFC Rev.01
6.6. POINTS TO NOTE ON DISASSEMBLY.
a. Disassemble according to the pre-set steps.
b. Necessary tools should be ready before disassembly.
c. Mark the disassembled parts so as to facilitate re-assembly.
d. Place parts, bolts and nuts etc, in a box to avoid misplacing.
e. Avoid damage to heavy parts during transportation.
f. Dust accumulation on coil-end, ducts etc., should be cleaned during
disassembly.
g. Coat parts with light oil.
h. Note if there is any shaft deflection or bearing damage when re-assembling.
i. Disassemble and assemble bearing according to the bearing maintenance
manual.
For safety and to prevent equipment damage properly trained
personnel must only carry out maintenance and repairs.
To Next Page
Loading...