Teco Installation and Maintenance Manual
TEFC Squirrel Cage Induction Motors
Teco Electric and Machinery Company
Manual Number: IOM ~ TEFC Rev.01
Table 4.
*Fill new grease until it displaces the old grease completely.
Do not grease the motor whilst it is at standstill. If there is a draw-out
device for grease, draw out the used grease after greasing, please leave
excess grease on the rake as this will further protect the exit port from
moisture entry.
7.1.9. Temperature of bearing.
Temperature of the bearing will rise slightly, but this is temporary while
greasing and will return to normal a few minutes after greasing. Brief
temperature variations are of no concern, grease should be pumped in
sparingly to avoid excess temperatures being experienced.
To Next Page
Loading...
Need help?
General
