TECO Tank TK 150 - Technical Data and Specifications; Technical Features; Installation and Operation; Unpacking of the Device

9
TANK CHILLER LINE
3 MANUAL ORGANIZATION AND CONSULTATION MODE
3.1 MANUAL STRUCTURE
The manual is divided into chapters, each corresponding to main topics, that provide
information required to use the product without any risk.
3.2 DESCRIPTION OF PICTOGRAPHS
In this manual the following symbols are used to highlight specifi c information and warnings:
WARNING: This symbol indicates safety regulations for the operator and/or for people who may
be exposed.
CAUTION: This symbol indicates that there is a possibility of damage to the product and/or its
components.
NOTES: This symbol indicates useful information
4 TECHNICAL DATA AND SPECIFICATIONS
4.1 TECHNICAL FEATURES
Specifi cations
Model
TK 150
Supply
230V - 50Hz
230V - 60Hz
115V - 60Hz
Power consumption (cooling) 190 W
Water inlet / outlet 12 mm - 1/2 in
Minimum / maximum fl ow rate 300 l/h – 80 gal/h / 500 l/h – 132 gal/h
Maximum Pressure 0,5 bar 7,25 PSI
Weight 12,2 kg - 26,9 lb
Dimensions
215 x 361 x 315 (h) mm
8,46 x 14,21 x 12,4 (h) in
Gas inside the conditioner Verify which gas is present in the model purchased (see plate) Rif. A3 Fig. 4
All data are approximate and may be changed without notice by TECO.
Tab. 4-1
The device can contain fl uorinated greenhouse gases covered by the Kyoto Protocol.
Type R134a GWP: 1430
5 INSTALLATION AND OPERATION
5.1 UNPACKING OF THE DEVICE
CAUTION: do not turn upside down neither the packaging nor the appliance. Keep the packag-
ing box and materials for future movement or transport.
1) Open the packaging and remove the accessories (Rif. A Fig. 2).
2) Pull out the device grasping side handles.
3) Remove the polystyrene (Rif. C Fig. 3).
4) Remove the plastic bag.
EN