6
WARNING
STEP 2 : Connect the Power
1. Connect the power plug to the mains power outlet.
2. Switch mains power to ON.
Note: Do not connect the clothes dryer to an extension cord or multiple power
board.
WARNING: Never operate electrical equipment with wet hands to
avoid injury, electric shock or damage to the appliance.
BEFORE FIRST USE
During manufacturing or transport, dust and grease may remain in the dryer
drum. Before use, please perform the following maintenance:
1. Place some clean rags into the dryer drum.
2. Plug in the power cord to the mains power.
3. Select the “Quick” program and press the “Start/Pause”
button.
4. Once the program is complete, please refer to and
follow the maintenance
procedure to clean the lint fi lter on Pages 9 & 10.
DRYING TIPS:
For optimal performance and results from your clothes dryer, please refer to
the points below.
Before placing items in the dryer, place them through a spin cycle in a
washing machine. This will assist in removing excess water and moisture.
choosing a high spin speed can assist in reducing drying time and energy
consumption.
To achieve consistent and uniform drying results, sort the items to be dried
by fabric type.
Select a program best suited for the fabric type of the items to be dried.
Remove all items from pockets and do up buttons and zippers of each item
before placing inside the dryer to avoid damage to the
dryer and items.
Avoid over drying items. Over drying items can increase
the chance of creases and may cause items to shrink.
Check tags attached to items for correct drying
instructions.
Do not attempt to dry fabrics that contain latex or rubber material.
Avoid touching or opening the door during a program as it may be hot.
Clean the lint fi lter after each use. Doing so will maintain drying effi ciency.
To Next Page
Loading...