TECO TD-20E1 - Troubleshooting

11
CAUTION
Symptom Solution(s)
The dehumidi er does not operate Ensure the power is ON.
Check the power cord. Ensure it is securely
plugged in and switched on.
Check the power supply to the house. Ensure
the fuse has not blown or if the safety switch
has been activated.
Check the water tank is empty and correctly in
position.
The appliance is not reducing the
humidity
Check the  lter is not dirty or contaminated.
Check the air inlet and outlet are not
obstructed.
Check the room humidity is above what the
dehumidi er is set to.
Check that no doors or windows remain open.
Remove objects or devices that may be
producing or increasing the room’s humidity.
The dehumidi er is too noisy Check that the dehumidi er is placed on a  at,
stable and secure surface.
The dehumidi er is leaking Check that the dehumidi er is in good
working order and the cabinet and water tank
is not cracked.
NOTE: If problems persist, switch o the dehumidi er and unplug from the main power source.
Contact TECO Australia Service as soon as possible. Never attempt to repair the appliance.
It is hazardous for anyone altering, repairing or servicing the dehumidi er.
Only an Authorised Service Person can carry out servicing or repairs to this appliance.
IF SERVICE IS REQUIRED:
If you have a problem, and the problem persists after you have made the checks mentioned above, contact:
TECO Australia’s Service on 1300 660 037 during business hours (8.30am – 5pm AEST).
For warranty details please visit www.teco.com.au
The dehumidi er does not collect
water
The humidity is low.
The temperature is low.
TROUBLESHOOTING