TECO TK1000 - Step 4: Remove INOX Screws

STEP n. 3
Disconnect:
- Power cable hot wire from
wago connector (brown or
black wire. See img.9-10-11)
- Power cable neutral wire from
wago connector (blue or white
wire. See img.9-10-11)
- Power cable ground wire from
wago connector (yellow-green
or green wire. See img.9-10-11)
- Compressor cable connector
(img.12)
- Probes green connector
(img.13-14)
www.tecoonline.com | www.tecous.com
9 10 11
12 13 14
POWER
CABLE