TECO TWS-TSO26H3DVEM - Optimal Performance Conditions

Unit
Specifications
and Features
 Page 7 
Achieving Optimal Performance
Optimal performance for the COOL, HEAT, and DRY modes can be achieved in the following
temperature ranges. When your air conditioner is used outside of these ranges, certain safety
protection features will activate and cause the unit to perform less than optimally.
To further optimize the performance of your unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
Inverter Split Type
Mode
Tempera ture
Room temperature
Outdoor temperature
1. Optimum performance will be achieved within these operating temperatures.If air conditioner
is used outside of the above conditions, certain safety protection features might come into
operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high(over 80%) ,
condensed water may drip out of the unit. Please sets the vertical air flow louvre to its
maximum angle (vertically to the floor), and set HIGH fan mode.
NOTE:
Cooling operation
Heating operation
Drying operatio n
17
O
C~32
O
C
O O
(62 F~90 F)
0
O
C~30
O
C
(32
O
F~ 86
O
F)
10
O
C~32
O
C
O O
(50 F~90 F)
0
o
C~50
o
C
(32
o
F~122
o
F)
0
o
C~50
o
C
(32
o
F~122
o
F)
-15
o
C~30
o
C
(5
o
F~86
o
F)