THE CHALLENGER MENU
The menu has 24 options available for performing various functions. Some of the
functions are specific only to certain installations, while others may not be authorised to
you.
Before commencing, the bottom line of the display must show “Code:”
To display the menu options available to you.
<MENU *> The display will show, “To Access Menu Enter Code”
1 2 3 4 <ENTER> Enter your PIN code
The display will show the prompts for scrolling through the menu options:
i.e.
<ENTER> Move forwards one by one through the menu options.
Or
<MENU *> Move backwards one by one through the menu options.
Or
0 <ENTER> Exit the menu and return to the display shown in step 1.
Selecting a Menu Option: the option need not be shown on the display. If you know
the option number you need not move to it to select it.
? (Option number) <ENTER>
<ENTER> To exit a menu option. This will return you to the menu.
0 <ENTER> To exit the menu. This will return you to the original display.
Menu Options:
1….. Panel Status 14….. Program Users
2….. Inputs Unsealed 15….. Time and Date
3….. Inputs in Alarm 16….. Isolate/De-isolate RAS/DGP
4….. Inputs Isolated 17….. Enable/Disable Service Tech
5….. History 18….. Reset Cameras
6….. Test Report 19….. Installer Menu
7….. Service Menu 20….. Door and Floor Groups
8….. Film Counters 21….. Holidays
9….. Input Text 22….. Open Door
10… Isolate Input 23….. Unlock, Lock, Disable and Enable
11… De-Isolate Input Doors
12… Test Input 24….. Print History
13… Start Auto Access Test
To Next Page
Loading...
