p. 4
Installation
The unit should be mounted via its screw holes on the brack-
et. Always ensure that the unit is rmly xed to avoid vibra-
tion and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is
able to support a weight of 10 times of the unit’s weight. Also
always use a safety cable that can hold 12 times of the weight
of the unit when installing the xture.
The equipment must be xed by professionals. And it must
be xed at a place where is out of the touch of people and has
no one pass by or under it.
Technical Specications
• Three operational modes: DMX, Master/Slave and
Sound Active
• DMX Channel mode: 6/9 CH
• Three built-in programs. Control Master/Slave mode
by voice
• 0-100% smooth dimming function
• Suitable for disco, bar mobile Dj, etc.
• Voltage: AC 100-240V, 50/60Hz
• Power consumption: 165W
• LEDs: 6 x 12W RGBWAUV
• Net weight: 2 Kg.
• Dimensions: 26x26x36 Cm.
How to Set the Fixture
1- The indicating light
2- Function display: display menu and the selected function
3- Menu button
4- Microphone
5- DMX signal output
6- Power supply socket
7- DMX signal input
NEBULA 6 - 12W * 6PCS LED PAR LIGHT
English Version
To Next Page
Loading...