Tecsun BCL-3000 - User Manual

18
SPECIFICATIONS
1. Frequency range
FM 87~108 MHz
MW 520~1610 kHz
SW1 3000~8000 kHz
SW2 8000~17000 kHz
SW3 17000~28000 kHz
2. Sensitivity
FM (S/N=30dB) Less than 5μV
MW (S/N=26dB) Less than 0.5mV/m
SW (S/N=26dB) Less than 30μV
3. Selectivity
FM ＞40 dB (±200kHz)
MW ＞40 dB (±9kHz)
SW ＞40 dB (±5kHz)
4. FM Stereo crosstalk Less than 20 dB
5. Output (Distortion 10%) 1000 mW
6.External Antenna input
FM 75
MW/SW 50
7. Power supply
Batteries: D size , UM1(alkaline) X 4
DC adaptor: DC 6V 500mA, negative ,
Outside diameter:φ5.5mm, core diameter: 2mm
8. Speake φ102mm, 2W/8Ohm
9. Earphone Jack φ3.5mm, 8~32 Ohm, Stereo type
10. Dimensions Approx. : 272(W) X 173(H) X 88(D) mm
11. Weight : 1400g (Batteries not included)
Ohm
Ohm
φ

Tecsun BCL-3000 Specifications

General

Headphone Jack	3.5 mm
Type	Portable Radio
Tuning Steps	9 kHz (MW)
Speaker	8 Ω
Antenna	Built-in Ferrite Bar Antenna and Telescopic Antenna
Power Supply	DC 6V
Batteries	4 x AA

Summary

Specifications

Frequency Range

Details operational frequency bands for FM, MW, and SW.

Sensitivity

Specifies signal-to-noise ratios for different wave bands.

Power Supply

Describes battery type and DC adapter requirements.

Control Locations

Connecting to Power

Turning the Radio On and Off

Tuning in FM Stations

Tuning in MW Stations

Tuning in Shortwave Stations

Daytime and Nighttime Bands

Interference and Noise Control

Setting the Clock

Using the Sleep Timer

Alarm Clock

Setting, Activating, and Deactivating

Using the Reset

Using the Line Out Sockets

Using Supplementary Antennas