What to do if my Tecsun PL-990x battery has no power?
If your Tecsun Radio battery has no power, you should replace or charge the battery. Also, ensure the sleep timer is deactivated, and then turn the radio back on.
How to fix a weak signal on my Tecsun PL-990x Radio?
If your Tecsun Radio has a weak signal or strong interference, try manually searching for the station. You can also adjust the antenna's length and direction, or move to a different location. For MW (AM) stations in the Americas, ensure the tuning step is set to 10 kHz by turning off the device and holding the [ 3 ] button.
Why is my Tecsun Radio not picking up AM stations in the US?
If your Tecsun Radio isn't picking up AM stations in the US, it might be set to 9 kHz tuning steps instead of the 10 kHz used in the Americas. To fix this, turn off the radio and then press and hold the [ 3 ] button to change the MW tuning step to 10 kHz.
How to adjust the FM frequency range on my Tecsun PL-990x?
To adjust the FM frequency range on your Tecsun Radio, first find information about the FM frequency coverage in your country. Then, turn off the radio, press and hold the [ 1 ] button to select a suitable range.
How to widen the AM bandwidth on my Tecsun PL-990x?
To widen the AM bandwidth on your Tecsun Radio, press the [ AM BANDWIDTH + ] button repeatedly until you achieve a wider bandwidth.
What to do if my Tecsun Radio alarm isn't working?
If your Tecsun Radio alarm isn't working, ensure that a broadcast is available at the alarm time and location. Alternatively, switch the alarm to use the audio player instead of the radio.
General| Frequency Range AM | 520 - 1710 kHz |
|---|---|
| Frequency Range SW | 1711 - 29999 kHz |
| Frequency Range LW | 100 - 519 kHz |
| Display | LCD with backlight |
| SSB | Yes |
| Selectivity FM | >60dB |
| Frequency Range FM | 64-108 MHz |
| Type | Portable Radio |
| Modes | AM, FM, LW, SW, SSB |
| Audio Output | Headphone and speaker |
| Antenna | External antenna jack, telescopic antenna |
| Tuning Steps AM | 1 kHz / 9 kHz / 10 kHz |
| Tuning Steps SW | 1 kHz / 5 kHz |
| Sensitivity FM | 3 μV |
| Sensitivity AM | 1 mV/m |
| Selectivity AM | >60dB |
| Additional Features | Alarm clock, Sleep timer |
Instructions for powering the device using battery or adapter and charging the battery.
Setting the clock, frequency ranges (FM, MW, LW), antenna selection, and LW band.
Methods for tuning stations (manual, auto scan, keypad), storing, recalling, and deleting stations.
Adjusting antenna gain, AM bandwidth, SSB, SYNC, and FM stereo/mono for optimal reception.
Using the device as an audio player, playback controls, track management, and album selection.
Setting alarms, sleep timers, snooze, display modes, keylock, tone, and audio output.
Guidance on resolving common issues, troubleshooting, and performing a system reset.
Device safety guidelines, lithium battery precautions, and detailed technical specifications.
To Next Page
