TECSYSTEM NT538 - DISPLAY AND DATA MANAGEMENT; OPERATIONAL AND DATA MANAGEMENT FUNCTIONS

7
NT538
TECHNICAL SPECIFICATIONS
NT538 BASIC NT538 AD
TESTS AND PERFORMANCE
Front polycarbonate IP65
● ●
Housing NORYL 94 _V0
● ●
Absorption 7,5VA
● ●
Data memory 10 years minimum
● ●
Digital linearity of sensor signal
● ●
Self-diagnostic circuit
● ●
Protection treatment of the electronic part Option Option
DISPLAY AND DATA MANAGEMENT
2x13mm displays with 3 digits to display temperatures, messages and channels
● ●
3 LEDs to display the state of the alarms of the selected channel
(ALARM-TRIP-FAULT)
● ●
2 LEDs to display the state of FAN1 and FAN2
● ●
Temperature control from 0°C to 240°C (*)
● ●
1 alarm thresholds for each channel
● ●
1 trip thresholds for each channel
● ●
2 ON-OFF thresholds for FAN 1 and FAN 2 in common for all enabled channels
● ●
Sensor diagnostics (Fcc-Foc-Fcd)
● ●
Data memory diagnostics (Ech)
● ●
Access to programming through front keyboard
● ●
Automatic exit from relay programming, display and test after 1 minute's inactivity
● ●
Incorrect programming warning
● ●
Selection between channel automatic scanning, hottest channel or manual scanning
● ●
Storage of maximum temperatures reached by channels and alarm status
● ●
Front key to reset the alarms
● ●
Voting function
● ●
(*) On demand, available version from -40°C to 200°C with alarm temperature management range from 0°C to 200°C