To Next PageTo Next Page
Need help?Do you have a question about the TECSYSTEM VRT200 and is the answer not in the manual?
General| Brand | TECSYSTEM |
|---|---|
| Model | VRT200 |
| Category | Control Unit |
| Language | English |
Power supply requirements and precautions, including handling of the power cable.
Precautions regarding liquid exposure, humidity, and contact with wet hands.
Guidelines for safely cleaning the control unit using a dry cloth.
Warning against inserting any objects into the cracks of the control unit.
Emphasizes that only qualified personnel should operate or intervene on the device.
Importance of using original accessories and spare parts to ensure safety.
Recommendations for installing the control unit in a suitable indoor environment.
Instructions regarding repairs, opening the unit, and warranty voidance.
Contact information for technical assistance and inquiries.
Rated values for the power supply, including voltage and frequency.
Details and specifications for the unit's input terminals.
Details and specifications for the unit's output terminals.
Information on the physical size and mounting dimensions of the control unit.
Information on compliance with CE regulations and interference protection.
How the unit displays information and manages data via LEDs and buttons.
Details on power supply requirements and potential voltage variations.
How the device operates when switched on and its modes (REMOTE/LOCAL).
Guide to interpreting LED indicators for various alarm conditions.
Procedure for resetting a motor after an alarm condition occurs.
Specific recommendations for optimizing operation with BAR 400 or 600.
Conditions for proper functioning with non-TECSYSTEM fans.
How to initiate the programming sequence by pressing the PRG/SET button.
Setting the maximum current variation percentage for alarm.
Navigating to and setting the start delay time.
Navigating to and setting the trip delay time for alarms.
Navigating to and configuring the overtemperature and auxiliary stop.
Enabling or disabling PTC sensor inputs for motor temperature control.
Initiating the automatic calibration process for motors.
Details on product warranty terms, conditions, and invalidation causes.
Table listing common causes and solutions for device malfunctions.
Information on proper disposal of electrical and electronic waste (WEEE/RoHS).
