26 27
SCAN
Y
208
The rangefinder
will lock onto
the nearest
target (the flag)
and display
the distance.
NOTE It is important not to pan too far because the
rangefinder may "lock" onto an object in the closest
distance that is not your intended target.
Use "Pin Seeker Mode" (to find the
closest vertical object) the distance to
a flagstick on a green with woods in the
background; as well as when measuring
overlapping targets. It is also good to
use on a windy day. The locking function
allows you to confidently take your shot.
PIN SEEKER MODE
Press the Mode Button briefly
to see a flag icon on the display
which indicates that you are in
Pin Seeker Mode.
MODE
Target an object behind the flag.
Press and hold the Power Button
while slowly sweeping over the flag.
27
To Next Page
Loading...
Need help?
General
