29
SCAN
-17
Y
85
56
Y
NOTE When measuring be sure to have no other
object between you and your target.
Use "Slope Mode" to obtain the distance
to the closest object when multiple objects
are detected and also corrects for the angle.
(This mode is also known as the "Closest
Distance Object Priority Function").
SLOPE MODE
29
Aim the object whose distance you
want to calculate and press the Power
Button while aiming at a target.
Press the Mode Button until you
see the Angle symbol and the Flag
on the screen as an indicator that the
Slope is ON.
MODE
The angle of the slope will appear next
to the Angle symbol. Next to the
larger Y or M (yards/meters) will be the
distance, and next to the smaller Y or M
will be the slope corrected distance.
To Next Page
Loading...
Need help?
General
