15
Manufacturer:
Berg TECTOOL GmbH
Hermann-Heinrich-Gossen-Str. 3
50858 Cologne
DEAR BERG TECTOOL CUSTOMER,
Congratulations on the purchase of you new Tectool vacuum cleaner. Prior to using the appliance for the first
time, be sure read this document through and keep it ready to hand.
NOTE
According to the applicable product liability laws, the manufacturer of the device does not assume liability for
damages to the product or damages caused by the product that occurs due to:
Improper handling,
Non-compliance of the operating instructions,
Repairs by third parties, not by authorized service technicians,
Installation and replacement of non-original spare parts,
Application other than specified,
A breakdown of the electrical system that occurs due to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113
WE RECOMMEND
Read through the complete text in the operating instructions before installing and commissioning the device.
The operating instructions are intended to help the user to become familiar with the machine and take advantage
of its application possibilities in accordance with the recommendations. The operating instructions contain
important information on how to operate the machine safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to increase reliability and service life of the machine. In
addition to the safety regulations in the operating instructions, you have to meet the applicable regulations
that apply for the operation of the machine in your country. Keep the operating instructions package with the
machine at all times and store it in a plastic cover to protect it from dirt and moisture. Read the instruction manual
each time before operating the machine and carefully follow its information. The machine can only be operated by
persons who were instructed concerning the operation of the machine and who are informed about the associated
dangers. The minimum age requirement must be complied with. In addition to the safety requirements in these
operating instructions and your country’s applicable regulations, you should observe the generally recognized
technical rules concerning the operation of woodworking machines.
DEVICE DESCRIPTION (Fig. 1)
1. Folding bow-shaped handle 14. Telescopic vacuum pipe
2. Vacuum hose 15. On/Off switch
3. Vacuum nozzle 16. Blast nozzle
4. Carrying handle 17. Unlock button for telescopic vacuum pipe
5. Speed regulation 18. Tapping function button
6. Pipe and accessory holder 19. Handle
7. Socket 20. Foam filter
8. Quick coupling 21. HEPA Filter
9. Rear wheels 22. Dust extraction adapter
10. Front wheels 23. Joint nozzle
11. Water tank 24. Brush nozzle
12. Floor nozzle 25. Dust bag
13. Hose connection cover
UNPACKING
Open the packaging and remove the device carefully.
Remove the packaging material as well as the packaging and transport bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for the transport damage.
If possible, store the packaging until the warranty period has expired.
To Next Page
Loading...