2/12
These instructions concern SILENSYS® units as described in chapter 2.
Read carefully the following instructions before installing the unit.
1 ADVICE
TRANSPORT
For information regarding the supply of these units refer to “general terms and conditions”.
INSTALLATION
- This unit and relating equipment must be installed by qualified staff.
- The installation of the unit, including refrigeration and electrical connection, is subject to
the norms and technical standards in the respective country.
- TECUMSEH EUROPE S.A. declines all responsibility if installation and maintenance are not
carried out in accordance with these instructions.
2 TECHNICAL DATA
1.1. Name plate
REFERENCE DESCRIPTION
A Voltage
B Frequency
C Number of phases
D Nominal current
E Production order number
F Refrigerant
G Description of the unit
H Serial number
To Next Page
Loading...
