To Next PageTo Next Page
Need help?Do you have a question about the Tecumseh WINTSYS Series and is the answer not in the manual?
General| Series | WINTSYS |
|---|---|
| Category | Heat Pump |
| Refrigerant | R-410A |
| Power Supply | 208/230V, 1-phase, 60Hz |
| Operating Temperature Range (Cooling) | 23°F to 115°F |
| Dimensions (Outdoor Unit) | Varies by model, consult product data sheet |
| Weight (Outdoor Unit) | Varies by model, consult product data sheet |
Guidelines for safe transportation and handling of the unit.
Details on the unit's serial identification label, safety features, and refrigeration diagrams.
Procedure for unpacking the unit and checking its condition.
Recommendations for choosing an appropriate installation site and minimizing noise.
Instructions for accessing and connecting refrigerant lines.
Procedure for safely connecting electrical power and control circuits.
Guidance on connecting various system components.
Methods for checking the refrigeration circuit for leaks.
Steps for achieving a proper vacuum in the refrigeration circuit.
Instructions for correctly charging the system with refrigerant.
Procedure for cleaning the condenser and accessing internal parts.
Instructions for safely replacing the unit's fan.
Guidance on replacing the compressor unit.
Routine procedures for identifying refrigerant leaks and checks.
Regular checks for electrical connections and components.
Procedure for replacing the dehydration filter in the circuit.
Information on the unit's warranty terms and conditions.
Statement confirming product compliance with relevant directives.
Declaration regarding the product's status as a component for incorporation.
Step-by-step guide for installing the T-Connect system.
Instructions for safely detaching the T-Connect from the unit.
Details on the automatic reset feature of the pressure switch.
Details on the manual reset feature of the pressure switch.
