EasyManua.ls Logo

Tecumseh Silesys - User Manual

Tecumseh Silesys
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FR
ENDEESIT
RU
ANNEXES
NOTICE D’INSTALLATION - INSTALLATION INSTRUCTIONS
MONTAGEANLEITUNG - MANUAL DE INSTALACIÓN
ISTRUZIONI PER L’INSTALLAZIONE - ИНСТРУКЦИЯ ПО МОНТАЖУ

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Tecumseh Silesys and is the answer not in the manual?

Tecumseh Silesys Specifications

General IconGeneral
BrandTecumseh
ModelSilesys
CategoryAir Conditioner
LanguageEnglish

Summary

WARNING

Transport

Information regarding unit delivery and general sales conditions.

Installation

Requirements for qualified personnel and adherence to standards for connections.

TECHNICAL DATA

2.1. Identification label for the SILENSYS range

Refers to Appendix 1, page 30 for identification label details.

2.2. Safety devices

Details adjustable HP/LP pressure switch, isolator, and thermal breaker on the power circuit.

2.3. Options and available

Lists options like manual reset HP/LP pressure switch, fusible plug on receiver, and liquid sight glass.

2.4. Refrigeration schematic

Refers to Appendix 2, pages 30-31 for refrigeration schematics.

INSTALLATION

3.1. Unpacking

Check exterior condition and packaging for damage before unpacking.

3.2. Handling

Instructions for moving the unit using forklifts, pallet trucks, or straps.

3.3. Location

Guidelines for selecting a suitable installation location, considering clearance and load capacity.

3.4. Noise levels

Design considerations for quiet operation and avoiding additional noise and vibrations.

3.5. Mounting

Instructions for mounting the unit securely on a stable, rigid base.

3.6. Access to connections

Refers to Appendix 4, page 34 for access points.

3.7. Refrigeration connections

Details on refrigerant connections, including nitrogen charge and valve tightening torques.

INSTALLATION

3.8. Electrical connections

Safety precautions and requirements for electrical connections, wiring, and earthing.

START UP

4.1. Preventing leakage

Systematic leak detection using electronic detectors and pre-charge of nitrogen.

4.2. Pulling a vacuum

Instructions for pulling a deep vacuum on the installation to achieve a specific residual pressure.

4.3. Refrigerant charge

Procedure for charging the unit with refrigerant, including liquid phase charging and pre-charge.

4.4. Fan speed control

Explanation of fan speed control by a pressure-actuated variator to manage condensing pressure.

SERVICING AND MAINTENANCE

5.1. Condenser

Instructions for cleaning the heat exchanger and the unit at least once a year.

5.2. Replacing the fan

Steps for replacing the fan motor and its capacitor, including disconnections and unmounting.

5.3. Leak checking and periodical inspections

Annual leak detection and periodic checks as per local regulations, using appropriate equipment.

5.4. Electrical checks

Systematic checking of electrical component connections and regular checks of safety devices and operation.

5.5. Filter drier

Information on the brazed filter drier and selection criteria for replacement.

WARRANTY

DECLARATION OF CONFORMITY

DECLARATION OF INCORPORATION

Related product manuals