tedee GO TLV2.0 - FACTORY RESET

www.tedee.com19
• Remove Tedee lock from the cylinder and place it in the vertical position (button up).
• Press and hold the button until the LED lights up in RED.
• Release the button immediately after the LED turns RED.
• After releasing the button, Tedee lock will conrm the factory reset with three quick red ashes.
• Wait until the lock restarts (it may take up to one minute).
Note: Remember to position your Tedee GO lock vertically (button up).
FACTORY RESET
TEDEE GO LOCK
(VERTICAL POSITION)