Owner’s manual 17
EN
MANUAL
Default mode for this device is manual. It is a user-controlled mode: the user manually controls
time and speed by rotating speed adjustment knob. The LCD display will be as below.
1. Modes:
• Manual mode: adjust the speed knob to start mixing. Turn it back to “0” to stop. Control
the mixing time according.
• Turbo: marked as T, push and hold to use this mode.
2. Speed control
• 0: o
• T: turbo
Adjust the speed, rotating the speed control button clockwise (from 0 to MAX, the closer to
MAX, the higher the speed).
Note:
The device will stop working if it was interrupted during operation (e.g. top cover opened).
Rotate the speed control button to “0” position, then restart.
AUTO
Press SELECT button once to switch from manual mode to auto mode. The LCD display will
be as below.
To Next Page
Loading...
