Figure 6
Repacking the Small Parts
Figure 6: Slide the Handles and Roller Hinges into a
Medium Bag. Slide the small Accessories, Hardware,
and Product Support Materials into a Small Bag and
pack all the parts as shown. The larger Accessories
including the Lumbar Bridge and Head Pillow can
remain loose in the box.
Sealing the Box & Attaching the Label
Seal the large box securely with packing tape, affix the return label and mark your
Return Authorization Number (RA #) on the outside panel of the box.
IMPORTANT: Teeter Inversion Tables cannot be returned without a Return Authorization Number.
Please contact Teeter Customer Service at (800) 847-0143 or email info@teeter.com for assistance.
USA: Teeter
9713 233rd Ave E, Suite A
Bonney Lake, WA 98391
Toll Free: 800-847-0143
Fax: 800-847-0188
teeter.com | info@teeter.com
If you have any trouble assembling the equipment, or questions
about its use, please contact customer service.
USA: 800-847-0143 or info@teeter.com
International: info@teeterintl.com
To Previous Page
Loading...