18
Problems
Recommendations
If steam is escaping
around the lid
accompanied by a
loud noise:
• Make sure the seal is not caught between the pan
and the lid.
If steam is escaping
around the lid,
check:
• The lid is correctly locked.
• The position of the seal in the lid.
• The condition of the seal, if necessary replace it.
• The cleanliness of the lid, seal and its housing in the
lid.
• The condition of the edge of the pan.
If one of the safety
systems is
triggered:
• Turn off the heat source.
• Let the pressure cooker cool completely.
• Check the selector (F) is set to .
• Wait for the pressure indicator (D) to go down and
open.
• Check and clean the steam release outlet, the safety
valve and the seal.
• If the problem persists, call our Customer Relations
Helpline.
If you cannot open
the lid:
• Check the selector is set to .
• Check the pressure indicator (D) is at the low position
• If not, release the steam.
• Never interfere with this pressure indicator
If food is not
cooked or burnt,
check:
• Cooking time
• The power of the heat source
• The operating valve is in the correct position
• The quantity of liquid
If your pressure
cooker has heated
without liquid
inside:
• If the problem persists, call our Customer Relations
Helpline.
To Next Page
Loading...
Need help?
General
