To Next PageTo Next PageWhat to do if the red tank empty light is flashing on my TEFAL Effectis Easy Iron?
If the red «tank empty» button on your TEFAL Iron is flashing even after you've filled the tank, it means you haven't pressed the «OK» restart button. To solve this, simply press the «OK» restart button on the control panel.
How to fix a TEFAL Effectis Easy that won't turn on?
If the steam generator of your TEFAL Iron doesn't switch on, and neither the iron indicator light nor the «ON- OFF» light are lit, it could be due to a couple of reasons. First, ensure that the appliance is correctly plugged into a working power socket and switched on; then, press the «ON-OFF» button. Alternatively, the «AUTO-OFF» system might have activated after 30 minutes of non-use. If this is the case, press the «ON-OFF» restart button located under the control panel.
How to fix no steam on TEFAL Effectis Easy?
If there is no steam or very little steam coming from your TEFAL Iron, it is likely that the water tank is empty and the red warning light is flashing. To fix this, fill the water tank and press the «OK» button until the light goes out.
Why is my TEFAL Effectis Easy Iron leaking water?
If water is running out of the holes in the sole-plate of your TEFAL Iron, it could be because the soleplate isn't hot enough. Wait for the thermostat light to stop flashing before activating the steam control. Another reason might be that water has condensed in the pipes because you're using steam for the first time or haven't used it for a few minutes. Press the steam button while holding your iron away from the ironing board until the steam starts to come out.
Why is my TEFAL Effectis Easy Iron spitting out white chalky stuff?
If white streaks are coming through the holes in the soleplate of your TEFAL Iron, it indicates that scale is coming out of the boiler because it isn't being rinsed regularly. To fix this, rinse the collector (see § descaling your steam generator).
What to do if anti scale light keeps flashing on my TEFAL Iron?
If the «Anti-scale» button on your TEFAL Iron is flashing even after you've rinsed the boiler, it means you haven't pressed the «OK» restart button. To resolve this, press the «OK» restart button located under the control panel.
Why is my TEFAL Effectis Easy Iron leaving water marks?
If you're seeing water streaks appear on your linen when using your TEFAL Iron, it's likely that your ironing board cover is soaked with water because it's not suited to the power of a steam generator. To resolve this, ensure that you have a suitable ironing board that has vented mesh.
Why is steam leaking from my TEFAL Iron?
If steam is coming out around the boiler of your TEFAL Iron, it could be due to a couple of reasons. The boiler might not be tightened correctly, so try tightening it, but be careful not to overtighten it. Alternatively, the boiler seal could be damaged, in which case you should contact an Approved Service Centre.
What to do if my TEFAL Effectis Easy is leaking from underneath?
If steam or water is coming out from under your TEFAL Iron, it indicates that the appliance is faulty. Stop using the steam generator and contact an Approved Service Centre.
Why is my TEFAL Effectis Easy Iron leaving brown stains on my clothes?
If you notice brown streaks coming through the holes in the soleplate of your TEFAL Iron and staining your linen, there are a couple of potential causes. One possibility is that you're using chemical descaling agents or additives in the water for ironing. To prevent this, never add any products to the water tank. Another reason could be that your linen isn't rinsed sufficiently, or you've ironed a new garment before washing it. To resolve this, ensure linen is rinsed thoroughly to remove any soap deposits or chemicals on new garments which may be sucked up by the iron.
Your steam generator has a retaining hoop to lock the iron onto the base for transport and storage.
Details on the types of water suitable for use, including tap water and demineralised water.
Instructions for filling the water tank safely and correctly up to the maximum level.
Steps for turning on the steam generator for the first time and during normal use.
Explanation of the indicator lights and buttons on the control panel.
Recommendations and steps for effective steam ironing.
How to use the steam boost function for automatic sequential steam.
Explanation of SMART TECHNOLOGY EASY and ECO MIN mode for energy saving.
How to set the iron temperature control dial according to fabric type.
Instructions for performing dry ironing without using steam.
Guidance on how to use steam for vertical garment steaming.
Information on the automatic shut-off safety system activated after 8 minutes.
Steps to refill the water tank while the appliance is in use when the light flashes.
Instructions for cleaning the steam generator, soleplate, and plastic parts.
Procedure for rinsing the boiler to remove scale and extend life.
Guidance on how to properly store the steam generator after use.
A troubleshooting guide for common issues with the steam generator, including causes and solutions.
General