16
• Allow your iron to heat up with a full water tank while
on its heel rest and with the thermostat control set to
normal.
• Once the indicator light turns off, unplug the iron and
place it over a sink.
• Remove the anti-calc valve.
• Shake the iron gently in a horizontal position over the
sink until some of the water (containing the impurities)
leaks from the soleplate. You may push the turbo
steam trigger to help flush out the minerals.
• To finish the process, replace the anti-calc valve,
pushing it until you hear a click.
• Plug in your iron for 2 minutes on the heel rest to dry
the soleplate.
To Next Page
Loading...
