TEFAL IH7208 - Page 6

8 9
EN
FRY FUNCTION
STIR-FRY FUNCTION
HOTPOT FUNCTION
• Turn on the cooker and press
Fry
to start “Fry” function. The cooker will
heat at designated temperature and the LED display will show “200”.
The on/off light and the “Fry” light are on.
• The default cooking time is 120 minutes, press
to adjust the time
(refer to timer function).
• The temperature range for “Fry” function is 60°C - 240°C, press “+” or “-”
or sweep to adjust the temperature level.
• There are 9 temperature levels for the induction hob, i.e. 60°C, 80°C,
120°C, 140°C, 160°C, 180°C, 200°C, 220°C and 240°C.
• Turn on the cooker and press
Stir-fry
to start “Stir-fry” function. The cooker
will heat at designated power and the LED display will show “P10”. The
on/off light and the “Stir-fry” light are on.
• The default cooking time is 120 minutes, press
to adjust the time
(refer to timer function).
• There are 10 power levels for the induction cooker, i.e. 2100W, 1800W,
1600W, 1400W, 1200W, 1000W, 800W, 600W, 300W, 100W and the
corresponding displayed codes are P10, P9, P8, P7, P6, P5, P4, P3, P2,
P1.
• During cooking, press “+” or “-” key or sweep to adjust the power level.
• Turn on the cooker and press
Hotpot
to start “Hotpot” function. The cooker
will heat at designated power and the LED display will show “P8”. The
on/off light and the “Hotpot” light are on.
• The default cooking time is 120 minutes, press
to adjust the time
(refer to timer function).
• There are 10 power levels for the induction cooker, i.e. 2100W, 1800W,
1600W, 1400W, 1200W, 1000W, 800W, 600W, 300W, 100W and the
corresponding displayed codes are P10, P9, P8, P7, P6, P5, P4, P3, P2,
P1.
• During cooking, press “+” or “-” key or sweep to adjust the power level.
BOOST MODE
TIMER FUNCTION
PAUSE FUNCTION
• Turn on the cooker and select desired cooking function (only available
for “Stir-fry” and “Hotpot” functions), the cooker will heat at designated
power and the LED display will show “P10” for “Stir-fry” function and
“P8” for “Hotpot” function. The on/off light and the desired cooking
function light are on.
• Press
Boost
to start “Boost” mode and the light is on, it will go to maximum
heating power and display will show “booS” .
• Under the “Boost” mode operation, the power level will be returned to
previous setting under the below 3 conditions:
– press “Boost” mode key again
– press “-” key
– operation after 3 minutes
• During cooking, press “+” or “-” key or sweep to adjust the power level.
• Press
to enter the timer function, then press “+” or “-” or sweep to
adjust the cooking time.
• After entering to timer, the screen displays “88:88” and minutes will
flash, then select the time by using “+” or “-”, press
to confirm and
select hours. To confirm the time setting, press
once or time will be
set if no operation in 5 seconds.
• Timer setting:
a. Press “+” “-” key to adjust the time by minute or hour
b. Press “+” “-” key and hold for 2 seconds, the time will be adjusted
quickly by minute or hour.
c. Sweep in clockwise or anti-clockwise to adjust the time by minute
or hour.
• Maximum time : 23 hours 59 minutes
• Press
to stop the cooking process at any time; to resume cooking,
press
again.
• Duration time of pause is 1 minute under operation status and 1
minute under no operation status.
• Pause function works even under malfunction or abnormal situation.