Why does my TEFAL optigrill+ stop during pre-heating or cooking?
If your TEFAL Grill stops during pre-heating or cooking, this could be because it was left open for too long or was idle for too long after warming up. To fix this, disconnect the grill from the outlet for 2-3 minutes and then restart the process. To prevent this from happening again, quickly open and close the grill during cooking.
What to do if the TEFAL optigrill+ Grill indicator light stays purple and cooking doesn't start?
If the indicator light on your TEFAL Grill stays purple and cooking doesn't start after preheating, it could be due to several reasons: * The food quantity exceeds 4 cm. Reduce the amount of food. * The grill wasn't fully opened when you placed the food. Ensure you open the grill completely before closing it again. * The appliance might not be detecting the food because the quantity is insufficient. Press the OK button to confirm cooking activation.
Why is the button blinking and the indicator light solid green on my TEFAL optigrill+?
If the button is blinking and the indicator light is solid green on your TEFAL Grill, it means the grill has automatically activated manual mode because you switched it on or started an automatic cooking cycle with food inside but without preheating the plates. You can either choose a temperature setting by pressing the button, then press OK and monitor the cooking manually, or stop the appliance, remove the food, close the appliance properly, re-program it, and wait for preheating to finish.
What to do if my TEFAL optigrill+ Grill indicator light blinks white with intermittent beeping?
If the indicator light blinks white, the button blinks, and there's intermittent beeping on your TEFAL Grill, it could be due to appliance failure or because the appliance is stored or used in a room that is too cold. Try disconnecting and reconnecting the appliance, then immediately restart a preheat cycle. If the problem continues, contact Customer Service.
Why is my TEFAL Grill activating in manual mode with a red blinking light?
If your TEFAL Grill activates in manual mode and the indicator light blinks red, it means the preheating time was cut short. You should monitor the cooking periodically while using manual mode. Alternatively, you can stop the grill, remove the food, close it, select a new cooking program, and wait for the preheating cycle to finish.
What does it mean when my TEFAL optigrill+ indicator light blinks white with continuous beeping?
If the indicator light blinks white, the button is blinking, and there is continuous beeping on your TEFAL Grill, it indicates an appliance failure. Unplug the appliance and contact customer service.
Details the process of pre-heating the appliance before cooking.
Instructions on opening the grill, placing food, and closing to start cooking.
Describes the cooking cycle, indicator lights, and beeps for different doneness levels.
Guidance on opening the grill and removing food when the desired cooking level is reached.
Instructions for cleaning dishwasher-safe plates and drip tray.
General| Type | Grill |
|---|---|
| Heat source | Electric |
| Total power | 2000 W |
| Cooking area | 600 cm² |
| Smoke function | - |
| Adjustable thermostat | Yes |
| Number of cooking programs | 6 |
| Castor wheels | No |
| Form factor | Tabletop |
| Product color | Black |
| Top surface type | Grate |
| Cooking surface shape | Oval |
Weight and Dimensions| Depth | 399 mm |
|---|---|
| Width | 229 mm |
| Height | 369 mm |
| Weight | 6000 g |
To Next Page