What to do if indicator flashing OK on TEFAL OPTIGRILL Grill?
If the indicator is flashing 'OK' on your TEFAL Grill, it means the appliance isn't sensing the food, possibly because the meat is too thin. To resolve this, confirm the start of the cooking by pressing the button.
Why does my TEFAL OPTIGRILL Grill stop during cooking?
If your TEFAL Grill stops during pre-heating or cooking, it might be that the appliance was kept open too long while cooking. Disconnect the appliance from the mains and wait 2-3 minutes before restarting. Next time, open and close the grill quickly for best results. If the problem persists, contact your local TEFAL customer service.
What to do if indicator flashing after placing food on TEFAL OPTIGRILL?
If the indicator is flashing after placing the food on your TEFAL Grill, it means the appliance isn't sensing the food, possibly because the meat is too thin. To resolve this, confirm the start of the cooking by pressing the button.
Why TEFAL Grill cooking doesn't start?
If you've placed food in your TEFAL Grill and closed it, but cooking doesn't start, it's likely that your food is thicker than 4 cm. Ensure the food is no thicker than 4 cm.
Why is the white light flashing on my TEFAL Grill?
If the indicator light on your TEFAL Grill is flashing white, it could indicate an appliance failure. Try disconnecting and reconnecting your appliance, then immediately restart a preheat cycle. If the problem persists, contact your Customer Service.
Why indicator stays on purple on TEFAL OPTIGRILL?
If the indicator on your TEFAL Grill stays purple after placing food, it means you haven't fully opened the grill to place the food. Completely open the grill, then close it.
Why does my TEFAL OPTIGRILL Grill turn off during manual cooking?
If the TEFAL Grill turns off during cooking in manual mode, it's likely because the cooking time has exceeded 30 minutes. To resolve this, simply press the on/off button and restart the manual mode.
What to do if my TEFAL OPTIGRILL stops during preheating or cooking?
If the TEFAL Grill stops during pre-heating or cooking, it might be because the appliance was kept open too long or has been idle for too long after warm-up. Disconnect the grill from the power outlet, wait 2-3 minutes, and then restart the process. Ensure you briefly open and close the appliance during use. If the problem continues, contact your local Tefal Customer Service.
Why is the white indicator light fixed on my TEFAL OPTIGRILL Grill?
If the white indicator light on your TEFAL Grill is fixed, it means a cooking cycle was started without preheating. You have two options: either allow the cooking to continue, monitoring it closely in manual mode, or stop the appliance, remove the food, close the appliance properly, reprogram it, and wait for preheating to complete.
What to do if the indicator is flashing on my TEFAL Grill after adding food?
If the indicator light is flashing after placing food on the cooking plates of your TEFAL Grill, it means the grill isn't sensing the food, possibly because the meat is too thin. Confirm the start of cooking by pressing the button.
Explanation of LED status lights during preheating and cooking.
List and explanation of dedicated cooking programs for various foods.
Steps to place food on the grill and initiate the cooking cycle.
Using indicators and sounds to track food doneness during cooking.
How to open the grill and remove food once the desired level is reached.
Details of the warranty period, exclusions, and conditions.
General| Drip Tray | Yes |
|---|---|
| Removable Plates | Yes |
| Indicator Light | Yes |
| Adjustable Thermostat | No |
| Adjustable Thickness | Yes |
| Cooking Programs | 6 |
To Next Page