To Next Page
C
Colleen HernandezAug 16, 2025
What to do if the red 'WATER' light is on for my TEFAL Pro Express Ultimate + GV9610?
- HHeidi CastroAug 16, 2025
The red 'WATER' light is on because the water tank is empty. To fix this, simply fill the water tank.
What to do if the red 'WATER' light is on for my TEFAL Pro Express Ultimate + GV9610?
The red 'WATER' light is on because the water tank is empty. To fix this, simply fill the water tank.
How to stop water running out of the TEFAL Iron soleplate?
If water runs out of the holes in the soleplate, it's likely because water has condensed in the pipes from using steam for the first time or not using it recently. To resolve this, press the steam control button while holding the TEFAL iron away from your ironing board until it produces steam.
How to clean a dirty TEFAL Pro Express Ultimate + GV9610 Iron soleplate?
If the soleplate of your TEFAL Iron is dirty or brown and may soil clothes, it's because you are ironing at too high a temperature. Clean the soleplate as indicated in the user manual and use a lower temperature.
Why is my TEFAL Pro Express Ultimate + GV9610 spitting out white streaks?
White streaks come out of the holes in the soleplate because your water tank has a build-up of scale from not being rinsed regularly. Rinse the anti-calc collector, referring to the 'descaling your generator' section or 'rinse the boiler' section, depending on your model.
What to do if my TEFAL Pro Express Ultimate + GV9610 Iron steam generator won't turn on?
The steam generator might not switch on, or the indicator lights might not be lit because the 'AUTO-OFF' system was activated after 30 minutes of non-use. Press the 'ON-OFF' restart button located on the control panel.
How to turn off the flashing 'anti-calc' light on my TEFAL Pro Express Ultimate + GV9610?
The 'anti-calc' light flashes because you have not pressed the 'OK' restart button. Press the 'OK' restart button on the control panel until the light goes out.
How to prevent scratches on my TEFAL Pro Express Ultimate + GV9610 soleplate?
The soleplate is scratched or damaged because you have positioned your iron flat on a metallic iron support or ironed over zips or metal fasteners. Always stand the TEFAL iron upright or on the iron rest.
Why does my TEFAL Pro Express Ultimate + GV9610 leave brown streaks on my clothes?
Brown streaks may come out of the holes in the soleplate and stain the laundry if you are using chemical descaling products or additives in the ironing water, or overusing the steam button. Never add any products to the water tank. Also, avoid holding down the steam button for too long, especially while the pump is adding more water into the boiler tank.
Why does my TEFAL Pro Express Ultimate + GV9610 leave water streaks on my clothes?
If water streaks appear on the laundry, it's likely because your ironing board cover is saturated with water because it is not suitable for use with a steam generator. Check that your ironing board is a vented/mesh type to avoid condensation.
What to do if the red 'WATER' light is flashing and the 'ONOFF' button does not work on my TEFAL Pro Express Ultimate + GV9610?
The red 'WATER' light might be flashing, and the 'ON/OFF' button might not work because the appliance has been stored in a cold place (approximately
General| Model | GV9610 |
|---|---|
| Brand | TEFAL |
| Category | Iron |
| Type | Steam Iron |
| Power | 2600 W |
| Vertical Steam | Yes |
| Auto Shut-Off | Yes |
| Anti-Scale | Yes |
| Self-Cleaning Function | Yes |
| Anti-Calc System | Yes |
| Heating Time | 2 min |
| Soleplate Material | Durilium Airglide |
Instructions for unlocking the steam generator, unwinding cords, filling the water tank, and plugging in.
Steps to switch off, unplug, remove, fill, and reinsert the water tank correctly.
How to use the lock system to secure the iron for easy transport and storage.
Guide to using the control panel and MODE button to select SMART, ECO, DELICATE, NORMAL, or MAX settings.
Explanation of how to activate BOOST mode for increased steam output and its automatic switch to MAX mode.
Instructions for removing creases from garments while they are hung, using vertical steam.
Details on the automatic standby and shut-off system after periods of inactivity.
Procedure for emptying and rinsing the anti-calc collector when the orange light flashes.
Recommended procedure for rinsing the boiler tank every 6 months or 25 uses for regular maintenance.
Instructions for cleaning the soleplate with a damp cloth and the plastic parts with a soft cloth.
Steps for storing the appliance, including cord management, securing the iron, and cooling down the unit.
