EN
3332
• The default preset time will start from your selected cooking time.
• The range of preset is from the pre-selected cooking time up to 24 hours.
• Each press of and key can increase or decrease the delayed start time.
• When you have chosen the desired preset time, press (Start) key to
enter cooking status, the START indicator will remain ON and the
screen will display the number of hours left until the completion of the
cooking menu.
• The LED indicator of Delayed Start remains ON until the cooking process
starts. When cooking starts, LED indicator switches from Delayed Start
Key to Timer key.
Note:
No delayed start function available for: (Fry), (Bread rising/
Yogurt), (Baking), (Reheat), and (Keep warm) functions.
CLEANING & MAINTENANCE
• Ensure that the multicooker is unplugged and has cooled down
completely before performing any cleaning or maintenance.
• It is strongly recommended that you clean the appliance using a
sponge after each use – fig.4-5-6.
• Make sure to wipe off the vapor condensation from the product body
after each use.
• The cooking bowl, measuring cup, spatula and soup spoon are dishwasher safe
.
Cooking bowl, steam basket
• We do not recommend using abrasive powders or scouring pads.
• If food is stuck to the bottom, pour some water into the bowl and leave
to soak for a while before washing up.
• Dry off the cooking bowl thoroughly.
Caring for the cooking bowl.
• To care for your cooking bowl, carefully follow the instructions below:
• To ensure that the bowl remains in good condition, we recommend
that you do not cut food in the bowl.
• Be sure to always return the bowl to the multicooker.
• Use the plastic spoon provided or a wooden spoon; do not use metal
ustensiles to avoid damaging the surface of the bowl – fig.15.
• To avoid any risk of corrosion, do not pour vinegar into the cooking bowl.
• The surface of the bowl may change color after first use or with
prolonged use. This color change is the effect of steam and water—it
will not affect the use of the multicooker and is not hazardous to your
health. You can continue to use it safely.
Cleaning the inner lid
Remove the inner lid by pushing outwards with both hands (fig.3). Clean
it with a sponge and washing up liquid (fig.4). Then wipe dry and put it
back behind the 2 ribs and push it on the top until it’s fixed – (fig.7–8).
Cleaning and care of the other parts of the appliance
Clean the outside of the multicooker – fig.6, the inside of the lid and the
cord with a damp cloth and wipe dry. Do not use abrasive products.
Do not use water to clean the interior of the appliance body as it could
damage the heat sensor.
TECHNICAL TROUBLESHOOTING GUIDE
Malfunction
description
Causes Solutions
Control panel
lights off and
no heating.
Appliance not
plugged in.
Check the appliance is
plugged in the socket, and
is switched on.
Control panel
lights off and
heating.
Problem of the
connection of the
indicator light or
indicator light is
damaged.
Send to authorized service
center for repair.
Steam leakage
during use.
Lid is badly closed.
Open and close the lid
again.
Inner lid not positioned
or assembled properly.
Ensure the inner lid is well
positioned – fig.7-8
To Next Page
Loading...
