9
ENG
Maintenance
•
Separate the black steam guard from
the white lid, using the clip.
•
Take out the anti-odour filter by pushing
hard from the inside of the steam guard.
•
Fit the anti-odour filter cartridge
(saturation indicator on top) on the rear
notch (1).
•
Press the cartridge until it ‘clicks’ into
place (2).
•
Replace the steam guard.
•
Insert the hooks of the steam guard into
the notches in the lid.
•
Press the steam guard on each side of
the locking clip until you hear a ‘click’.
•
To replace the lid:
Place the lid clamps into their slots.
Check that the
steam guard is
locked in place
before turning
over the lid.
Make sure that
the cartridge is
well fixed under
the three clips.
!
!
To Next Page
Loading...
