26
Soup program
• Place the ingredients in the cooking pot and completely close
and lock the lid.
• Turn the control panel knob to the right to reach Soup program
. The screen displays the default cooking time.
• Optional: Press and set the desired time by turning the
control panel knob to the right (to increase time) or to the left
(to decrease time).
• Press to start the cooking program.
• The appliance starts the pre-heating phase. The screen dis-
plays alternatively & and the pre-heating light
indicator turns on.
• When the pre-heating phase is completed, the appliance
switches automatically to cooking phase. The screen dis-
plays the count down and the cooking in progress light
indicator turns on.
• During cooking process, pressure builds up in the ap-
pliance and pushes the float valve up. The under pressure
light indicator turns on to notify that the lid cannot be ope-
ned without releasing the pressure first.
• At the end of the count down, the appliance beeps and the
screen displays .
• After a few seconds, the appliance will automatically switch
to keep warm phase. The screen displays and the keeping
warm light indicator turns on.
• Press for 3 seconds to stop the program at any time.
Stir-Fry program
• Turn the control panel knob to the right to reach Stir-Fry pro-
gram . The screen displays the default cooking time.
To Next Page
Loading...
