34
7. Use the delayed start function
Delayed start can be useful to preset the appliance to start
cooking later.
• First select a program following the steps described above
in part 6.
• Before starting the selected program, press . The screen
displays the default time for delayed start.
• Set the desired time by turning the control panel knob to the
right (to increase time) or to the left (to decrease time).
• Press . The screen displays the delayed start count down.
When preset time is elapsed, the appliance will start cooking
automatically.
8. Open the lid
• Do not attempt to open the lid if the float valve is up and if the
under pressure light indicator is turned on.
• The pressure can be release in 2 different ways at the end of
the cooking:
Natural release: At the end of the cooking or after stopping the
program, the appliance will cool down by itself, and the pressure
will release naturally. During natural release, food might over-
cook due to the remaining pressure in the pot. Use manual re-
lease to stop cooking process immediately.
Manual release: Press the pressure release button, on
top of the lid. It will take a few seconds to a few minutes
depending on the amount of food inside of the cooking pot (Fig.34).
WARNING: Be careful of the hot steam coming out from the
appliance. Keep your face and hands away from the steam
output (Fig.45).
• To open the lid, position your arm parallel to the side handles,
take hold of the lid knob, turn anti-clockwise and lift the lid up
(Fig.35 & 36).
To Next Page
Loading...
