Service Manual
CM 45 / CML 45 Coffee Maker
Service Manual: MS-CM-0002-01-1109 Technical Training Department - 10 -
Step 1: Position the rails on the side of the cabinet
Figure 4 Positioning of the side rails
Fix with the screws, then extract completely. If the coffee maker is
installed over a warmer drawer (500 W max.), use the top surface of this
as a reference to position the rails. In this case, there will be no surface to
rest the rails on.
Step 2: Fix the power cable with the clip
Figure 5 Fixing the power cable with the clip
The clip avoids the cable power to get tangle when the appliance is
inserted or extracted.