Teka CML 45 Service Manual

Service Manual
CM 45 / CML 45 Coffee Maker
Service Manual: MS-CM-0002-01-1109 Technical Training Department - 11 -
The power cable must be long enough to allow the appliance to be
extracted from the cabinet to fill the coffee beans container.
The appliance must be earthed in compliance with legislation.
Electrical connections must be performed by a qualified
electrician in compliance with the manufacturer's instructions
and legislation in force in the country of installation.
The electrical socket must be accessible.
Check that the mains power supply voltage corresponds to the value
indicated on the appliance rating plate.
Connect the appliance to an efficiently earthed and correctly
installed socket with a minimum current rating of 10A only.
Do not use multiple sockets or extensions.
Step 3: Position the coffee maker on the rails
Figure 6 Positioning the CM 45 in the rails
Position the appliance on the rails, making sure the pins are correctly
inserted in the housings, then fix it with the screws supplied

Teka CML 45 Specifications

General

Brand	Teka
Model	CML 45
Category	Coffee Maker
Language	English