Teka CML 45 Service Manual

Service Manual
CM 45 / CML 45 Coffee Maker
Service Manual: MS-CM-0002-01-1109 Technical Training Department - 9 -
3. Installation process
Verify the minimum measurements required for correct installation of the
appliance. The coffee maker must be installed in a column and the column
must be firmly fixed to the wall with commercially available brackets.
All installation or maintenance operations must be
performed with the appliance disconnected from the
mains electricity supply.
Kitchen furniture in direct contact with the appliance
must be heat resistant (65°C min)
Find below the dimensions of the appliance, kitchen furniture and
ventilation gaps:
Figure 3 CM 45 dimensions, furniture dimensions and
ventilation gap dimensions
This appliance can be installed in combination with a built-in oven if the
latter is fitted with a cooling fan at the rear (maximum oven power: 3 kW).

Teka CML 45 Specifications

General

Brand	Teka
Model	CML 45
Category	Coffee Maker
Language	English