28/
EN
Express Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Extra Dry Function
(Depends on model)
It provides superior drying performance.
Half Load function
(Depends on model)
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
While the function is enabled, the Half
Load indicator will come on in the function
selection indicator and on the display.
4. Start the programme by pressing Start
/ Pause / Cancel key.
With the Half Load function you can
save both water and power while using
the lower and upper baskets of the
machine.
Tablet detergent function
(depends on model)
Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one detergents
such as 2in1, 3in1, 4in1, 5in1 and etc.,
depending on the hardness level of the tap
water.
If you have used the Tablet features
during the last washing programme
you used, Tablet function will remain
active in the next washing programme
you will select.
Tablet Detergent function may cause
change in the programme duration.
PowerWash Function
(Depends on model)
This function operates the lower impeller
with a higher pressure and higher speed to
enable a better washing for dishes such as
pans and trays with stubborn, dried soiling.
Auto Tablet Feature
(Depends on model)
Auto Tablet is a feature which detects
the use of combined tablet detergents
automatically.
Drying performance of these type of
detergents is improved by adjusting
temperature and duration accordingly.
Owing to this feature, there is no need
to press any button in case of a tablet
detergent use.
Feature can be activated if automatic
detection is desired.
To activate / to deactivate:
1. After turning on the machine, press
Time Delay and P keys simultaneously.
Keep them pressed until the
countdown 3, 2, 1 is completed on the
display.
2. Press P key to activate the a: option.
Automatic detergent detection feature
is disabled at “a:0” option and enabled
at “a:1” option. Set the desired option
by pressing the Time Delay key.
3. Turn off the machine with On/Off key to
save the changes.
IonClean function
(depends on the model)
IonClean function is enabled at regular
intervals and prevents the formation of
bad odours due to putrefaction. If this
function is selected, it will be activated
while the product is turned off and the
IonClean indicator on the panel will flash.
A ventilation noise can be heard, this
is normal. Until the function selection is
disabled, system is automatically activated
intermittently.
To Next Page
Loading...
